TL series-hot sale steel cable carrier track

TL series steel cable drag chains are mainly consisting of chain plate (top quality stainless steel with chromium plated),supporting board (extruded aluminium alloy) and pinshaft (alloy),ect.There is no relative motions between the cables/rubber hoses and the steel drag chains,giving no deforming or twist.The chromium plates chain board has very nice-looking appearance and has very rational construction and flexible and high strength.It is reliable and easy to operate,install,dismantal or assemble.It is worthwhile mentioning that the anti-wearing performance has been improved greatly due to wear resistant material and alloy pinshaft are used.The product is flexible to bending and has low resistance,giving low noices.It can be used for a very long period of time without any deformation or hanging down.

The product is nice-looking ,which makes the machine tool unit nicer looking as a whole and makes the machine tools and machineries more competitive in the international market.

1. The steel cable carrier chain can adapt to max.moving speed of 40m/sec.

2. When at the max moving speed,the sound pressure of moises shall noe be greater than 68db.

The service life of the steel cable chain shall not be less than 1 millon times(reciprocating).

Selecting of steel cable chain:

1. The hole diameter of the inner cavity of supporting board D1=d+≈0.1d(take round number).Where,d=outside diameter of cables,wires,liquid/gas hoses.

2. The height of the supporting board and the model number TLXX of steel cable track depends on the max.hole diameter of the inner cavity of the supporting.

3. The bend radius depends on the functions of the steel drag chains.

(1).When there is a large load from larger caliber or cables on the steel cable drag chains,high strength model Ⅰsupporting board (integral)should be used.

(2).When the size of the connectors are greater than that of the hole diameter of the inner cavity of supporting board of frequent assembly or dismantal operations are required,type Ⅲsupporting board(frame type)can be arrived.

4.The width of supporting board B1can be decided according to the quantity of the cables installed so that the width of the drag chain B can be arrived.

5.When limited by locations or environment and if bracing board with steel starps are needed,please contact our company for solutins.

Note:

1. Length under 6meters can be used as usual.

2. Length upon 6meters per piece should be added supporting rollers or guide groove.

3. Both bridge type and enclosed type are available here.

4. Double rows or several rows can be customized.